Showing 409–420 of 3225 results
Dayton 1/70 hp Centrifugal Pump, 2HNN6
In stock
| Maximum Flow Rate |
365 gph |
|---|---|
| Type of Product |
Centrifugal Pump |
| Is Consumable |
N |
| Head Range |
12.5 ft |
| Power |
0.014 HP |
| Phase |
Single Phase |
| Country of Origin |
China |
| Frequency |
60 Hz |
| Part No |
2HNN6 |
| Standard |
CSA Certified UL Listed |
| Item Code |
2HNN6 |
| Impeller Material |
Acetal |
| Flow Rate |
308-365 gph |
| Head Range m |
3.81 m |
| Features |
Thermoplastic Motor Housing Handles Water with a Higher Mineral Content |
| Seal Material |
Viton |
| Thermal Over Load Protector |
Yes |
| Discharge Type |
NPT |
| Duty Cycle |
Continuous |
| Nameplate Voltage |
115 V AC |
| Overall Length |
4.6 inch |
| Compatible Intake Pipe Size |
3/4 inch |
| Maximum Feet of Head |
12.5 ft |
| Overall Height |
5.3 Inch |
| Overall Width |
2.9 inch |
| Feet of Head |
1 ft |
| Intake and Discharge Size |
3/4 inch |
| Amps |
1.5 A |
| Intake Type |
Screened |
| Mounting Location |
Submersible |
| Pumping Application |
Condensate Removal and Mache Coolant Recirculation Displays Evaporative Coolers Fountains Vaporizers |
| Motor Sealing |
Epoxy Encapsulated |
| Cord Length |
609.6 cm |
| Electrical Connections |
Plug-In |
| Maximum RPM |
3,400 RPM |
| UNSPSC Code |
40151510 |
| Hose Size |
3/8 inch |
| Media Type |
Oil |
| Maximum Flow Rate 1 Foot of Head |
365 gph |
| Maximum Flow Rate 5 Feet of Head |
308 gph |
| Maximum Flow Rate 10 Feet of Head |
238 gph |
| Pump Housing Material |
Plastic |
| Dispaly |
1 |
| Overall Length cm |
11.68 cm |
| Overall Height mm |
134.62 mm |
| Overall Width mm |
73.66 mm |
Dayton 1/70 hp Centrifugal Pump, 2HNN7
In stock
| Maximum Flow Rate |
371 gph |
|---|---|
| Type of Product |
Centrifugal Pump |
| Is Consumable |
N |
| Head Range |
12.5 ft |
| Power |
0.014 HP |
| Phase |
Single Phase |
| Country of Origin |
China |
| Frequency |
60 Hz |
| Part No |
2HNN7 |
| Standard |
CSA Certified UL Listed |
| Item Code |
2HNN7 |
| Impeller Material |
Acetal |
| Flow Rate |
308-371 gph |
| Head Range m |
3.81 m |
| Features |
Thermoplastic Motor Housing Handles Water with a Higher Mineral Content |
| Seal Material |
Viton |
| Thermal Over Load Protector |
Yes |
| Discharge Type |
NPT |
| Duty Cycle |
Continuous |
| Nameplate Voltage |
115 V AC |
| Overall Length |
4.6 inch |
| Compatible Intake Pipe Size |
3/4 inch |
| Maximum Feet of Head |
12.5 ft |
| Overall Height |
5.3 Inch |
| Overall Width |
2.9 inch |
| Feet of Head |
1 ft |
| Intake and Discharge Size |
3/4 inch |
| Amps |
1.5 A |
| Intake Type |
Screened |
| Mounting Location |
Submersible |
| Pumping Application |
Condensate Removal and Mache Coolant Recirculation Displays Evaporative Coolers Fountains Vaporizers |
| Motor Sealing |
Epoxy Encapsulated |
| Cord Length |
6 ft |
| Electrical Connections |
Plug-In |
| Maximum RPM |
3,400 RPM |
| UNSPSC Code |
40151510 |
| Hose Size |
3/8 inch |
| Media Type |
Oil |
| Maximum Flow Rate 1 Foot of Head |
371 gph |
| Maximum Flow Rate 5 Feet of Head |
308 gph |
| Maximum Flow Rate 10 Feet of Head |
238 gph |
| Pump Housing Material |
Plastic |
| Dispaly |
1 |
| Overall Length cm |
11.68 cm |
| Overall Height mm |
134.62 mm |
| Overall Width mm |
73.66 mm |
| Cord Length m |
1.83 m |
Dayton 1/70 hp Centrifugal Pump, 2HNN8
In stock
| Maximum Flow Rate |
375 gph |
|---|---|
| Type of Product |
Centrifugal Pump |
| Is Consumable |
N |
| Head Range |
12.5 ft |
| Power |
0.014 HP |
| Phase |
Single Phase |
| Country of Origin |
China |
| Frequency |
60 Hz |
| Part No |
2HNN8 |
| Standard |
CSA Certified UL Listed |
| Item Code |
2HNN8 |
| Impeller Material |
Acetal |
| Flow Rate |
334-375 gph |
| Head Range m |
3.81 m |
| Features |
Thermoplastic Motor Housing Handles Water with a Higher Mineral Content |
| Seal Material |
Viton |
| Thermal Over Load Protector |
Yes |
| Discharge Type |
NPT |
| Duty Cycle |
Continuous |
| Nameplate Voltage |
230 V AC |
| Overall Length |
4.6 inch |
| Compatible Intake Pipe Size |
3/4 inch |
| Maximum Feet of Head |
12.5 ft |
| Overall Height |
5.3 Inch |
| Overall Width |
2.9 inch |
| Feet of Head |
1 ft |
| Intake and Discharge Size |
3/4 inch |
| Amps |
0.8 A |
| Intake Type |
Screened |
| Mounting Location |
Submersible |
| Pumping Application |
Condensate Removal and Mache Coolant Recirculation Displays Evaporative Coolers Fountains Vaporizers |
| Motor Sealing |
Epoxy Encapsulated |
| Cord Length |
6 ft |
| Electrical Connections |
Hardwired |
| Maximum RPM |
3,400 RPM |
| UNSPSC Code |
40151510 |
| Hose Size |
3/8 inch |
| Media Type |
Oil |
| Maximum Flow Rate 1 Foot of Head |
375 gph |
| Maximum Flow Rate 5 Feet of Head |
334 gph |
| Maximum Flow Rate 10 Feet of Head |
244 gph |
| Pump Housing Material |
Plastic |
| Dispaly |
1 |
| Overall Length cm |
11.68 cm |
| Overall Height mm |
134.62 mm |
| Overall Width mm |
73.66 mm |
| Cord Length m |
1.83 m |
Dayton 230 V AC Centrifugal Pump, 2HNN5
In stock
| Type of Product |
Centrifugal Pump |
|---|---|
| Is Consumable |
N |
| Head Range |
11 ft |
| Power |
0.008 HP |
| Phase |
Single Phase |
| Country of Origin |
China |
| Discharge Size |
1/4 inch |
| Frequency |
60 Hz |
| Part No |
2HNN5 |
| Standard |
CSA Certified UL Listed |
| Horse Power |
1/125 hp |
| Item Code |
2HNN5 |
| Impeller Material |
Acetal |
| Rpm |
3,400 RPM |
| Flow Rate |
195-255 gph |
| Head Range m |
3.35 m |
| Features |
Thermoplastic Motor Housing Handles Water with a Higher Mineral Content |
| Seal Material |
Viton |
| Discharge Type |
NPT |
| Duty Cycle |
Continuous |
| Nameplate Voltage |
230V AC |
| Overall Length |
4.5 inch |
| Overall Height |
4.8 Inch |
| Overall Width |
2.6 inch |
| Feet of Head |
1 ft |
| Amps |
0.64 A |
| Intake Type |
Screened |
| Mounting Location |
Submersible |
| Pumping Application |
Condensate Removal and Mache Coolant Recirculation Displays Evaporative Coolers Fountains Vaporizers |
| Motor Sealing |
Epoxy Encapsulated |
| Cord Length |
6 ft |
| Housing Material |
Plastic |
| UNSPSC Code |
40151510 |
| Media Type |
Oil |
| Manufacturer Part Number |
2HNN5 |
| Hose |
1/4 inch |
| Display Area |
1 |
| Overload Protection |
Yes |
| Overall Length cm |
11.43 cm |
| Overall Height mm |
121.92 mm |
| Overall Width mm |
66.04 mm |
| Cord Length m |
1.83 m |
Dayton 3 Hp 1 Phase 240 VAC Pump, 2ZXK2
In stock
| Type of Product |
Pump |
|---|---|
| Is Consumable |
N |
| Head Range |
130 ft |
| Power |
3 HP |
| Phase |
Single Phase |
| Country of Origin |
India |
| Frequency |
60 Hz |
| Part No |
2ZXK2 |
| Standard |
UL Listed (Motor Only) |
| Horse Power |
3 hp |
| Item Code |
2ZXK2 |
| Impeller Material |
Cast Iron |
| Rpm |
3,450 RPM |
| Shaft Material |
Stainless Steel |
| Flow Rate |
17-107 gpm |
| Seal Material |
Viton |
| Discharge Type |
NPT |
| Best Efficiency Head |
57 ft |
| Duty Cycle |
Continuous |
| Nameplate Voltage |
230 V AC |
| Wetted Material |
Carbon Cast Iron Ceramic Stainless Steel Viton |
| Connection Type |
NPT |
| Overall Length |
18 inch |
| Compatible Discharge Pipe Size |
1-1/4 inch |
| Compatible Intake Pipe Size |
1-1/2 inch |
| Solid Diameter Maximum |
0.31 inch |
| Overall Height |
8.9 Inch |
| Best Efficiency Flow |
95 gpm |
| Overall Width |
8.8 inch |
| Feet of Head |
10 ft |
| Specific Gravity |
1 |
| Housing Material |
Cast Iron |
| Shut Off Pressure |
56 psi |
| UNSPSC Code |
40151503 |
| Motor Enclosure |
Totally Enclosed Fan Cooled |
| Media Type |
Non-Flammable Liquids |
| Manufacturer Part Number |
2ZXK2 |
| Maximum Flow Rate 10 Feet of Head |
107 gpm |
| Maximum Flow Rate 40 Feet of Head |
92 gpm |
| Maximum Flow Rate 90 Feet of Head |
55 gpm |
| Maximum Flow Rate 50 Feet of Head |
87 gpm |
| Maximum Flow Rate 60 Feet of Head |
79 gpm |
| Maximum Flow Rate 20 Feet of Head |
103 gpm |
| Maximum Flow Rate 70 Feet of Head |
72 gpm |
| Maximum Flow Rate 80 Feet of Head |
63 gpm |
| Maximum Flow Rate 30 Feet of Head |
98 gpm |
| Maximum Flow Rate 100 Feet of Head |
43 gpm |
| Maximum Flow Rate 120 Feet of Head |
17 gpm |
| Overall Length cm |
45.72 cm |
| Overall Height mm |
226.06 mm |
| Overall Width mm |
223.52 mm |
Dayton 3/4 HP Single Phase Pump, 2ZXJ3
In stock
| Type of Product |
Pump |
|---|---|
| Is Consumable |
N |
| Head Range |
59 ft |
| Power |
0.75 HP |
| Phase |
Single Phase |
| Country of Origin |
India |
| Frequency |
60 Hz |
| Part No |
2ZXJ3 |
| Standard |
UL Listed (Motor Only) |
| Item Code |
2ZXJ3 |
| Impeller Material |
Cast Iron |
| Shaft Material |
Stainless Steel |
| Flow Rate |
12-53 gpm |
| Head Range m |
17.98 m |
| Seal Material |
Viton |
| Discharge Type |
NPT |
| Duty Cycle |
Continuous |
| Nameplate Voltage |
115/230V AC |
| Wetted Material |
Carbon Cast Iron Ceramic Stainless Steel Viton |
| Connection Type |
NPT |
| Overall Length |
15.5 inch |
| Compatible Discharge Pipe Size |
1 inch |
| Maximum Feet of Head |
90 ft |
| Solid Diameter Maximum |
0.31 inch |
| Overall Height |
8.5 Inch |
| Best Efficiency Flow |
33 gpm |
| Overall Width |
7.9 inch |
| Feet of Head |
10 ft |
| Specific Gravity |
1 |
| Housing Material |
Cast Iron |
| Shut Off Pressure |
42 psi |
| Intake Pipe Size |
1-1/4 inch |
| Maximum RPM |
3,450 RPM |
| UNSPSC Code |
40151503 |
| Motor Enclosure |
Open Dripproof |
| Compatible For |
Non-Flammable Liquids |
| Overall Length cm |
39.37 cm |
| Overall Height mm |
215.9 mm |
| Overall Width mm |
200.66 mm |
Dayton Gearbox For 13F046/13F047/1 VCF2/1 VCF3/1 VCF4/3PEH1, 21DY05
In stock
Dayton Hardened Steel BSP Pressure Plunger Pump 10 HP, 5ZNT5
In stock
| Is Consumable |
N |
|---|---|
| Type of Product |
Pressure Plunger Pump |
| Part No |
5ZNT5 |
| UNSPSC Code |
40151527 |
| Material |
Hardened Steel |
| Country of Origin |
China |
| Item Code |
5ZNT5 |
| Maximum Flow Rate |
4 gpm |
| Max. Discharge Pressure |
3,000 PSI |
| Discharge Port |
3/8 inch BSP |
| Lubrication |
Oil Bath |
| Wetted Material |
Brass |
| No. of Pistons |
3 |
| Flange Type |
NEMA 182-184 |
| Manifold Material |
Forged Brass |
| Design |
Triplex |
| Intake Connection Size |
1/2 inch |
| Maximum Operating Pressure |
3,000 PSI |
| Suction Ports |
1/2 inch BSP |
| Fluid Temperature |
140 °F |
| Connection Type |
BSP |
| Motor Speed |
1,750 RPM |
| Seal Material |
Buna-N |
| Overall Length |
8.8 inch |
| Plunger Material |
Ceramic |
| Bearing Type |
Ball |
| Crank Case Material |
Die Cast Aluminum |
| Shaft Type |
Solid |
| Connection Size |
9.53 mm |
| Drive Type |
Belt-Drive |
| Seal Type |
Cotton Duct |
| Head Material |
Forged Brass |
| Discharge Connection Type |
BSP |
| Horse Power |
10 HP |
| Overall Height |
5 Inch |
| Rod Material |
Aluminum |
| Series |
RRA |
| Overall Width |
8.6 inch |
| Shaft Outer Diameter |
24 mm |
| Shaft |
24 mm Solid |
| Overall Length cm |
22.35 cm |
| Overall Height mm |
127 mm |
| Overall Width mm |
218.44 mm |
| Connection Size Inch |
3/8 inch |
Dayton Hardened Steel BSP Pressure Plunger Pump 10 HP, 5ZNT9
In stock
| Is Consumable |
N |
|---|---|
| Type of Product |
Pressure Plunger Pump |
| Part No |
5ZNT9 |
| UNSPSC Code |
40151527 |
| Material |
Hardened Steel |
| Country of Origin |
China |
| Item Code |
5ZNT9 |
| Maximum Flow Rate |
4 gpm |
| Max. Discharge Pressure |
3,000 PSI |
| Discharge Port |
3/8 inch BSP |
| Lubrication |
Oil Bath |
| Wetted Material |
Brass |
| No. of Pistons |
3 |
| Flange Type |
NEMA 182-184 |
| Manifold Material |
Forged Brass |
| Design |
Triplex |
| Intake Connection Size |
1/2 inch |
| Maximum Operating Pressure |
3,000 PSI |
| Suction Ports |
1/2 inch BSP |
| Fluid Temperature |
140 °F |
| Connection Type |
BSP |
| Motor Speed |
1,750 RPM |
| Seal Material |
Buna-N |
| Overall Length |
8.8 inch |
| Plunger Material |
Ceramic |
| Bearing Type |
Ball Needle Roller |
| Crank Case Material |
Die Cast Aluminum |
| Shaft Type |
Hollow |
| Connection Size |
9.53 mm |
| Drive Type |
Direct-Mount |
| Seal Type |
Cotton Duct |
| Head Material |
Forged Brass |
| Discharge Connection Type |
BSP |
| Horse Power |
10 HP |
| Overall Height |
6.8 Inch |
| Rod Material |
Aluminum |
| Series |
RRA |
| Overall Width |
8.7 inch |
| Shaft Outer Diameter |
1-1/8 inch |
| Shaft |
1-1/8 inch Hollow |
| Overall Length cm |
22.35 cm |
| Overall Height mm |
172.72 mm |
| Overall Width mm |
220.98 mm |
| Connection Size Inch |
3/8 inch |
Dayton Hardened Steel BSP Pressure Plunger Pump 13 HP, 5ZNU0
In stock
| Is Consumable |
N |
|---|---|
| Type of Product |
Pressure Plunger Pump |
| Part No |
5ZNU0 |
| UNSPSC Code |
40151527 |
| Material |
Hardened Steel |
| Country of Origin |
China |
| Item Code |
5ZNU0 |
| Maximum Flow Rate |
4 gpm |
| Max. Discharge Pressure |
3,700 PSI |
| Discharge Port |
3/8 inch BSP |
| Lubrication |
Oil Bath |
| Wetted Material |
Brass |
| No. of Pistons |
3 |
| Flange Type |
Horizontal Gas Engine |
| Manifold Material |
Forged Brass |
| Design |
Triplex |
| Intake Connection Size |
1/2 inch |
| Maximum Operating Pressure |
3,700 PSI |
| Suction Ports |
1/2 inch BSP |
| Fluid Temperature |
140 °F |
| Connection Type |
BSP |
| Motor Speed |
3,400 RPM |
| Seal Material |
Buna-N |
| Overall Length |
8.8 inch |
| Plunger Material |
Ceramic |
| Bearing Type |
Ball Needle Roller |
| Crank Case Material |
Die Cast Aluminum |
| Shaft Type |
Hollow |
| Connection Size |
9.53 mm |
| Drive Type |
Direct-Mount |
| Seal Type |
Cotton Duct |
| Head Material |
Forged Brass |
| Discharge Connection Type |
BSP |
| Horse Power |
13 HP |
| Overall Height |
6.5 Inch |
| Rod Material |
Aluminum |
| Series |
RRV |
| Overall Width |
9.5 inch |
| Shaft Outer Diameter |
1 inch |
| Shaft |
1 inch Hollow |
| Overall Length cm |
22.35 cm |
| Overall Height mm |
165.1 mm |
| Overall Width mm |
241.3 mm |
| Connection Size Inch |
3/8 inch |
Dayton Hardened Steel BSP Pressure Plunger Pump 5 HP, 4WXV9
In stock
| Is Consumable |
N |
|---|---|
| Type of Product |
Pressure Plunger Pump |
| Part No |
4WXV9 |
| UNSPSC Code |
40151527 |
| Material |
Hardened Steel |
| Country of Origin |
China |
| Item Code |
4WXV9 |
| Maximum Flow Rate |
2.5 gpm |
| Max. Discharge Pressure |
2,700 PSI |
| Discharge Port |
3/8 inch BSP |
| Lubrication |
Oil Bath |
| Wetted Material |
Brass |
| No. of Pistons |
3 |
| Flange Type |
Horizontal Gas Engine |
| Manifold Material |
Forged Brass |
| Design |
Triplex |
| Intake Connection Size |
1/2 inch |
| Maximum Operating Pressure |
2,700 PSI |
| Suction Ports |
1/2 inch BSP |
| Fluid Temperature |
140 °F |
| Connection Type |
BSP |
| Motor Speed |
3,400 RPM |
| Seal Material |
Buna-N |
| Overall Length |
7.2 inch |
| Plunger Material |
Ceramic |
| Bearing Type |
Ball Needle Roller |
| Crank Case Material |
Die Cast Aluminum |
| Shaft Type |
Hollow |
| Connection Size |
9.53 mm |
| Drive Type |
Direct-Mount |
| Seal Type |
Chevron Cotton Duct Lip |
| Head Material |
Forged Brass |
| Discharge Connection Type |
BSP |
| Horse Power |
5 HP |
| Overall Height |
4.9 Inch |
| Rod Material |
Aluminum |
| Series |
RCV |
| Overall Width |
7.5 inch |
| Shaft Outer Diameter |
3/4 inch |
| Shaft |
3/4 inch Hollow |
| Overall Length cm |
18.29 cm |
| Overall Height mm |
124.46 mm |
| Overall Width mm |
190.5 mm |
| Connection Size Inch |
3/8 inch |
Dayton Hardened Steel BSP Pressure Plunger Pump 5 HP, 4WXW3
In stock
| Is Consumable |
N |
|---|---|
| Type of Product |
Pressure Plunger Pump |
| Part No |
4WXW3 |
| UNSPSC Code |
40151527 |
| Material |
Hardened Steel |
| Country of Origin |
China |
| Item Code |
4WXW3 |
| Maximum Flow Rate |
2 gpm |
| Max. Discharge Pressure |
2,500 PSI |
| Discharge Port |
3/8 inch BSP |
| Lubrication |
Oil Bath |
| Wetted Material |
Brass |
| No. of Pistons |
3 |
| Flange Type |
NEMA 182-184 |
| Manifold Material |
Forged Brass |
| Design |
Triplex |
| Intake Connection Size |
1/2 inch |
| Maximum Operating Pressure |
2,500 PSI |
| Suction Ports |
1/2 inch BSP |
| Fluid Temperature |
140 °F |
| Connection Type |
BSP |
| Motor Speed |
3,450 RPM |
| Seal Material |
Buna-N |
| Overall Length |
7.7 inch |
| Plunger Material |
Ceramic |
| Bearing Type |
Ball Needle Roller |
| Crank Case Material |
Die Cast Aluminum |
| Shaft Type |
Hollow |
| Connection Size |
9.53 mm |
| Drive Type |
Direct-Mount |
| Seal Type |
Chevron Cotton Duct Lip |
| Head Material |
Forged Brass |
| Discharge Connection Type |
BSP |
| Horse Power |
5 HP |
| Overall Height |
5.5 Inch |
| Rod Material |
Aluminum |
| Series |
RCV |
| Overall Width |
7.2 inch |
| Shaft Outer Diameter |
5/8 inch |
| Shaft |
5/8 inch Hollow |
| Overall Length cm |
19.56 cm |
| Overall Height mm |
139.7 mm |
| Overall Width mm |
182.88 mm |
| Connection Size Inch |
3/8 inch |